Does the Schiit Valhalla 2 drive the AKG K712 Pro?
Computed from rated specifications · target SPL 110 dB · load 50 Ω
Verdict
Adequate OTL-compatible pairingThe Schiit Valhalla 2 adequately drives the AKG K712 Pro with limited margin (~5.5 dB headroom at 50 ohms; needs ~51.1 mW, delivers 180 mW). This OTL tube amp suits the headphone's impedance (62 Ω) — a classically compatible pairing for high-output-impedance tube sources.
5.5 dB
51.1 mW
180 mW
1.78 Vrms
| Impedance | 62.0 Ω rated |
| Sensitivity | 92.92 dB/mW rated |
| Driver | Dynamic |
| Spec basis | Rated |
| Output impedance manufacturer | 14.0 Ω |
| Power @ 50 Ω | 180 mW |
| Power @ 300 Ω | 800 mW |
| Power @ 600 Ω | 450 mW |
| Power source | Manufacturer |
This OTL tube amp's high output impedance (14 Ω) is a good match for the AKG K712 Pro's 62 Ω impedance. The impedance ratio (4.4×) falls within the recommended range for high-output-impedance tube sources — a classically well-matched pairing.
Where to buy
Disclosure: links above are Amazon affiliate links. As an Amazon Associate this site earns from qualifying purchases — at no extra cost to you. Affiliate commissions do not influence verdicts; all analysis is computed independently from the data.
Other amplifiers for the AKG K712 Pro
| Amplifier | Headroom |
|---|---|
| Schiit Lyr 3 | Ample 20.7 dB |
| JDS Labs Atom Amp 2 | Ample 17.2 dB |
| Topping DX3 Pro+ | Ample 15.5 dB |
| Schiit Magni Heretic | Ample 15.0 dB |
| Little Dot MkII | Marginal 2.9 dB |
| Apple USB-C to 3.5mm | Insufficient -2.2 dB |
Other headphones the Schiit Valhalla 2 can drive
| Headphone | Headroom |
|---|---|
| Sennheiser HD 660S | Ample 22.5 dB |
| Sennheiser HD 800 S | Ample 20.6 dB |
| Philips SHP9500 | Ample 13.6 dB |
| Audeze LCD-2 Classic | Ample 13.6 dB |
| AKG K240 Studio | Adequate 3.6 dB |
| Fostex T50RP Mk3 | Marginal 1.7 dB |