Does the Schiit Asgard 3 drive the Philips SHP9500?

Computed from rated specifications · target SPL 110 dB · load 32 Ω

Ample

The Schiit Asgard 3 drives the Philips SHP9500 with ample headroom (~26.4 dB headroom at 32 ohms; needs ~7.9 mW, delivers 3500 mW).

Headroom
26.4 dB
Required (110 dB SPL)
7.9 mW
Delivered (@ 32 Ω)
3500 mW
Required voltage
0.50 Vrms

Power Headroom

Headroom: 26.4 dB 0 · target 26.4 dB below target marginal adequate ample -14 dB +10 +20 +36 dB

Scale shows dB headroom above the 7.9 mW required to reach 110 dB SPL. Amp delivers 3500 mW at 32 Ω (+26.4 dB above target).

Philips SHP9500 Dynamic · over-ear
Impedance 32.0 Ω rated
Sensitivity 101.0 dB/mW rated
Driver Dynamic
Spec basis Rated
Rated: Philips official spec (32 Ω, 101 dB/mW). RAA has no measurement page. · Source ↗
Schiit Asgard 3 Desktop Ss · Single Ended
Output impedance manufacturer 0.2 Ω
Power @ 16 Ω 5000 mW
Power @ 32 Ω 3500 mW
Power @ 50 Ω 2500 mW
Power @ 300 Ω 600 mW
Power @ 600 Ω 300 mW
Power source Manufacturer
Schiit Asgard 3 manufacturer spec: 5000/3500/2500/600/300 mW at 16/32/50/300/600 Ω. Output impedance <0.2 Ω from spec. · Source ↗

Where to buy

Schiit Asgard 3 on Amazon ↗ Philips SHP9500 on Amazon ↗

Disclosure: links above are Amazon affiliate links. As an Amazon Associate this site earns from qualifying purchases — at no extra cost to you. Affiliate commissions do not influence verdicts; all analysis is computed independently from the data.

AmplifierHeadroom
Schiit Lyr 3 Ample 28.8 dB
JDS Labs Atom Amp 2 Ample 25.2 dB
Topping DX3 Pro+ Ample 23.6 dB
FiiO K7 Ample 21.9 dB
Little Dot MkII Ample 11.0 dB
Apple USB-C to 3.5mm Adequate 5.9 dB

See all amplifiers for the Philips SHP9500 →

HeadphoneHeadroom
Grado SR80x Ample 30.7 dB
AKG K371 Ample 30.2 dB
Beyerdynamic DT 770 Pro 80 Ample 20.2 dB
Sennheiser HD 800 S Ample 19.4 dB
Beyerdynamic DT 770 Pro 250 Ample 12.2 dB
Beyerdynamic DT 990 Pro Ample 11.1 dB

See all headphones for the Schiit Asgard 3 →