Does the JDS Labs Atom Amp 2 drive the Sennheiser HD 660S?

Computed from measured specifications · target SPL 110 dB · load 150 Ω

Verdict

Ample

The JDS Labs Atom Amp 2 drives the Sennheiser HD 660S with ample headroom (~21.0 dB headroom at 150 ohms; needs ~4.5 mW, delivers 570 mW).

Headroom
21.0 dB
Required (110 dB SPL)
4.5 mW
Delivered (@ 150 Ω)
570 mW
Required voltage
0.99 Vrms

Power Headroom

Headroom: 21.0 dB 0 · target 21.0 dB below target marginal adequate ample -14 dB +10 +20 +36 dB

Scale shows dB headroom above the 4.5 mW required to reach 110 dB SPL. Amp delivers 570 mW at 150 Ω (+21.0 dB above target).

Sennheiser HD 660S Dynamic · over-ear
Impedance (rated) 150 Ω
Impedance (measured) Source: reference-audio-analyzer.pro/en/r… 216.75 Ω measured
Sensitivity (rated) 104.0 dB/mW
Sensitivity (measured) 103.45 dB/mW measured
Driver Dynamic
Spec basis Measured
Measured by Reference Audio Analyzer (https://reference-audio-analyzer.pro/en/report/hp/sennheiser-hd-660s.php) · Source ↗
JDS Labs Atom Amp 2 Desktop Ss · Single Ended
Output impedance manufacturer 0.1 Ω
Power @ 32 Ω 2650 mW
Power @ 150 Ω 570 mW
Power @ 300 Ω 286 mW
Power @ 600 Ω 143 mW
Power source Manufacturer
JDS Labs product page: 2650/570/286/143 mW at 32/150/300/600 Ω per channel. All published — no derivations. Output impedance <0.1 Ω from manufacturer. · Source ↗

Where to buy

Disclosure: links above are Amazon affiliate links. As an Amazon Associate this site earns from qualifying purchases — at no extra cost to you. Affiliate commissions do not influence verdicts; all analysis is computed independently from the data.

AmplifierHeadroom
Schiit Lyr 3 Ample 23.0 dB
Schiit Valhalla 2 Ample 22.5 dB
Topping L30 Ample 17.9 dB
Topping A90 Ample 17.4 dB
iFi Zen DAC V2 Adequate 9.0 dB
Apple USB-C to 3.5mm Insufficient -1.4 dB
HeadphoneHeadroom
Koss Porta Pro Ample 29.8 dB
Grado SR80x Ample 29.5 dB
AKG K702 Ample 18.6 dB
AKG K712 Pro Ample 17.2 dB
Beyerdynamic DT 770 Pro 250 Adequate 9.0 dB
Beyerdynamic DT 990 Pro Adequate 7.9 dB