Does the JDS Labs Atom Amp 2 drive the Beyerdynamic T1 (3rd Gen)?
Computed from rated specifications · target SPL 110 dB · load 600 Ω
Verdict
AmpleThe JDS Labs Atom Amp 2 drives the Beyerdynamic T1 (3rd Gen) with ample headroom (~11.6 dB headroom at 600 ohms; needs ~10.0 mW, delivers 143 mW).
Headroom
11.6 dB
11.6 dB
Required (110 dB SPL)
10.0 mW
10.0 mW
Delivered (@ 600 Ω)
143 mW
143 mW
Required voltage
2.45 Vrms
2.45 Vrms
Beyerdynamic T1 (3rd Gen)
Dynamic · over-ear
| Impedance | 600.0 Ω rated |
| Sensitivity | 100.0 dB/mW rated |
| Driver | Dynamic |
| Spec basis | Rated |
Rated: Beyerdynamic official spec (600 Ω, 100 dB/mW). RAA has only the original T1 and T1 Gen 2; no page for 3rd Gen — rated-only.
· Source ↗
JDS Labs Atom Amp 2
Desktop Ss · Single Ended
| Output impedance manufacturer | 0.1 Ω |
| Power @ 32 Ω | 2650 mW |
| Power @ 150 Ω | 570 mW |
| Power @ 300 Ω | 286 mW |
| Power @ 600 Ω | 143 mW |
| Power source | Manufacturer |
JDS Labs product page: 2650/570/286/143 mW at 32/150/300/600 Ω per channel. All published — no derivations. Output impedance <0.1 Ω from manufacturer.
· Source ↗
Where to buy
Disclosure: links above are Amazon affiliate links. As an Amazon Associate this site earns from qualifying purchases — at no extra cost to you. Affiliate commissions do not influence verdicts; all analysis is computed independently from the data.
Other amplifiers for the Beyerdynamic T1 (3rd Gen)
| Amplifier | Headroom |
|---|---|
| Schiit Lyr 3 | Ample 16.5 dB |
| Schiit Valhalla 2 | Ample 16.5 dB |
| Topping L30 | Ample 11.5 dB |
| Topping A90 | Ample 11.0 dB |
| iFi Zen DAC V2 | Marginal 2.6 dB |
| Apple USB-C to 3.5mm | Insufficient -8.0 dB |
Other headphones the JDS Labs Atom Amp 2 can drive
| Headphone | Headroom |
|---|---|
| Koss Porta Pro | Ample 29.8 dB |
| Grado SR80x | Ample 29.5 dB |
| HiFiMan Arya | Ample 19.2 dB |
| AKG K702 | Ample 18.6 dB |
| Beyerdynamic DT 770 Pro 250 | Adequate 9.0 dB |
| Beyerdynamic DT 990 Pro | Adequate 7.9 dB |