Does the Schiit Asgard 3 drive the Sennheiser HD 600?
Computed from measured specifications · target SPL 110 dB · load 300 Ω
Verdict
AmpleThe Schiit Asgard 3 drives the Sennheiser HD 600 with ample headroom (~18.3 dB headroom at 300 ohms; needs ~8.9 mW, delivers 600 mW).
Headroom
18.3 dB
18.3 dB
Required (110 dB SPL)
8.9 mW
8.9 mW
Delivered (@ 300 Ω)
600 mW
600 mW
Required voltage
1.77 Vrms
1.77 Vrms
Sennheiser HD 600
Dynamic · over-ear
| Impedance (rated) | 300 Ω |
| Impedance (measured) Source: reference-audio-analyzer.pro/en/r… | 352.1 Ω measured |
| Sensitivity | 100.5 dB/mW measured |
| Driver | Dynamic |
| Spec basis | Measured |
Measured by Reference Audio Analyzer (https://reference-audio-analyzer.pro/en/report/hp/sennheiser-hd-600.php)
· Source ↗
Schiit Asgard 3
Desktop Ss · Single Ended
| Output impedance manufacturer | 0.2 Ω |
| Power @ 16 Ω | 5000 mW |
| Power @ 32 Ω | 3500 mW |
| Power @ 50 Ω | 2500 mW |
| Power @ 300 Ω | 600 mW |
| Power @ 600 Ω | 300 mW |
| Power source | Manufacturer |
Schiit Asgard 3 manufacturer spec: 5000/3500/2500/600/300 mW at 16/32/50/300/600 Ω. Output impedance <0.2 Ω from spec.
· Source ↗
Where to buy
Disclosure: links above are Amazon affiliate links. As an Amazon Associate this site earns from qualifying purchases — at no extra cost to you. Affiliate commissions do not influence verdicts; all analysis is computed independently from the data.
Other amplifiers for the Sennheiser HD 600
| Amplifier | Headroom |
|---|---|
| Schiit Lyr 3 | Ample 20.0 dB |
| Schiit Valhalla 2 | Ample 19.5 dB |
| Topping L30 | Ample 15.0 dB |
| Topping A90 | Ample 14.5 dB |
| iFi Zen DAC V2 | Adequate 6.1 dB |
| Apple USB-C to 3.5mm | Insufficient -4.3 dB |
Other headphones the Schiit Asgard 3 can drive
| Headphone | Headroom |
|---|---|
| Grado SR80x | Ample 30.7 dB |
| AKG K371 | Ample 30.2 dB |
| HiFiMan Arya | Ample 20.4 dB |
| Beyerdynamic DT 770 Pro 80 | Ample 20.2 dB |
| Beyerdynamic DT 770 Pro 250 | Ample 12.2 dB |
| Beyerdynamic DT 990 Pro | Ample 11.1 dB |