Does the Schiit Asgard 3 drive the Beyerdynamic T1 (3rd Gen)?
Computed from rated specifications · target SPL 110 dB · load 600 Ω
Verdict
AmpleThe Schiit Asgard 3 drives the Beyerdynamic T1 (3rd Gen) with ample headroom (~14.8 dB headroom at 600 ohms; needs ~10.0 mW, delivers 300 mW).
Headroom
14.8 dB
14.8 dB
Required (110 dB SPL)
10.0 mW
10.0 mW
Delivered (@ 600 Ω)
300 mW
300 mW
Required voltage
2.45 Vrms
2.45 Vrms
Beyerdynamic T1 (3rd Gen)
Dynamic · over-ear
| Impedance | 600.0 Ω rated |
| Sensitivity | 100.0 dB/mW rated |
| Driver | Dynamic |
| Spec basis | Rated |
Rated: Beyerdynamic official spec (600 Ω, 100 dB/mW). RAA has only the original T1 and T1 Gen 2; no page for 3rd Gen — rated-only.
· Source ↗
Schiit Asgard 3
Desktop Ss · Single Ended
| Output impedance manufacturer | 0.2 Ω |
| Power @ 16 Ω | 5000 mW |
| Power @ 32 Ω | 3500 mW |
| Power @ 50 Ω | 2500 mW |
| Power @ 300 Ω | 600 mW |
| Power @ 600 Ω | 300 mW |
| Power source | Manufacturer |
Schiit Asgard 3 manufacturer spec: 5000/3500/2500/600/300 mW at 16/32/50/300/600 Ω. Output impedance <0.2 Ω from spec.
· Source ↗
Where to buy
Disclosure: links above are Amazon affiliate links. As an Amazon Associate this site earns from qualifying purchases — at no extra cost to you. Affiliate commissions do not influence verdicts; all analysis is computed independently from the data.
Other amplifiers for the Beyerdynamic T1 (3rd Gen)
| Amplifier | Headroom |
|---|---|
| Schiit Lyr 3 | Ample 16.5 dB |
| Schiit Valhalla 2 | Ample 16.5 dB |
| Topping L30 | Ample 11.5 dB |
| Topping A90 | Ample 11.0 dB |
| iFi Zen DAC V2 | Marginal 2.6 dB |
| Apple USB-C to 3.5mm | Insufficient -8.0 dB |
Other headphones the Schiit Asgard 3 can drive
| Headphone | Headroom |
|---|---|
| Grado SR80x | Ample 30.7 dB |
| AKG K371 | Ample 30.2 dB |
| HiFiMan Arya | Ample 20.4 dB |
| Beyerdynamic DT 770 Pro 80 | Ample 20.2 dB |
| Beyerdynamic DT 770 Pro 250 | Ample 12.2 dB |
| Beyerdynamic DT 990 Pro | Ample 11.1 dB |